Custom Rom Lenovo A319: How To Flash

By
0

You will find easy and simple step to flash android Custom Rom Lenovo A319 in this article. If you ever have performed fresh install for the windows PC, this process is similar. You will get a significant performance increased similar to a new phone for your device by performing a flash on the device. Stock ROM Mod installation failure or bootloop on the device is the reason why you should perform a flash your device. boot loop is a problem when the android OS could not boot up to enter the homescreen menu when you turn on the Lenovo A319. Your device won’t start and show the Lenovo logo. You can also try the twrp or Cwm recovery but those won’t be explained in this guide. CMW is a recovery process that can be done in recovery mode that allows customization of the device with several additional functions like restore or backup. This installation is not available in the standard recovery mode. In case of bootloop, there will not be a default recovery bootloop for Lenovo A319. When the hardbrick occurs, the original recovery cannot start.

Custom Rom Lenovo A319 Preparation

Follow this step by step guide to help you flash your device but remember that you could do it with your own risk. You need to download Firmware Custom Rom Lenovo A319for Lenovo A319 and the latest Version of SP flash tool. You also need the MTK Driver or Lenovo A319 USB Driver. You can find out which firmware compatible with your device by checking in Setting >About > Software Information >Build Number.

custom-rom-lenovo-a319-update

Custom Rom Lenovo A319 Installation

Install Lenovo A319 driver that you have already downloaded earlier. Extract the firmware ROM and flash tool that you have saved in your hard drive. And then take out the back case, the battery, the sim card and the SD Card from your device and then put them back on. While holding the volume up and power button, plug in your device to your computer. Let your computer detect the new hardware. Disconnect your device from the computer. Start SP flash tool in administrator and choose scatter load. Browse Scatter Storage location in your device. Browse the folder where you extracted the Flash Tool in the Scatter Loading field and choose scatter.txt. Choose options >Download > tick the DA DL all with checksum.

Choose download only option from dropdown menu on download tab. Choose download button and plug in your device in switch off condition to computer with USB cable. It will run installation automatic with the download red stripe progress bar running. Wait until it is complete. Disconnect your device and boot it. It will start a few minute and your Custom Rom Lenovo A319 is successfully installed.